Speakers built by hand
A speaker bought from Double A Design is always built by hand, by passionated handcrafters and with the best components on the market. By building the speakers ourselves we can contol the entire process from beginning to the end. In that way we can guarantee the quality of the product.
Ridiculously good sound
If we had to choose between good design or good sound, we’d always choose good sound. Because a speaker with appealing design but terrible sound can only be consider as one thing and one thing only. A decoration. Fortunately, we don’t have to choose. Speakers from Double A Design has both appealing design and ridiciously good sound, even though the sound comes first. We would never compromise the sound to make the speaker more attrative. It’s just not worth it.
2008
Our first model sees the light of day!
The first reincarnation Solon is born.
2-way bass reflex
Sensitivity 95 dB
Impedance 8 ohms
Frequency range 40-40kHz
2009
Solo was supplemented with the bass towers
Revolt
4 active 7 "bases
4 passive 7 "bases
Sensitivity 87 dB
Impedance 8 ohms
Frequency range 30-100 Hz
2010
Solo was supplemented with the base modules Pondus
2 active 12 "bases
Sensitivity 92 dB
Impedance 8 ohms
Frequency range 22-100 Hz
2011
A new Solo is shown for the first time at the Munich High-End show!
This time in collaboration with Engelholm Audio
The line array consists of 9 ceramic 6.25 inch bass/mid-range drivers. They team up with a true ribbon tweeter which have a membrane area 3 times greater than ordinary dome tweeters. The result is distortion free, effortless music - with any amplifier.
Technical data:
Height x Width x Depth: 1770 x 220 x 680 [mm]
Crossover 2nd order 2100 Hz
Impedance 8 ohm (min 7.1 ohms)
Sensitivity: 95dB/wm
Ported reflex system
Frequency response 35-40'000 Hz
2012
Solo M
Also in collaboration with Engelholm Audio
– the not so mini sibling of solo!
An impressive 92dB/w*m gives you both the dynamics that music deserves, as well as the freedom of choice when it comes to amplifier
Technical data:
Height x Width x Depth: 1450 x 220 x 350 [mm]
Crossover 2nd order 2200 Hz
Impedance 8 ohm (min 7.1 ohms)
Sensitivity: 92dB/wm
Ported reflex system
Frequency response 35-40'000 Hz
2015
A new series is born!
The first model is the Storyteller, a full-range speaker with a passive front and active back.
Technical specifications
3-way design
All elements work in closed volumes.
Frequency range 22 to 40,000 Hz
Crossover Frequency 60-100, 2250 Hz
Crossover’s Attenuation Slope: Midrange/Tweeter 6dB
Bass 4 x 8.3 / 4 ”aluminum cones
Midrange 6 x 6.5 ”Ceramic cones
Tweeter 1st 16cm aluminum ribbon diaphragm
Sensitivity mid / tweeter 91dB. Bass, active system separate amplifier 2 x 600 watts fully adjustable crossover and parametric EQ
2016
The second model in the Storyteller series, Tuvstarr! Also this speaker with passive front and active back..
A large speaker in a smaller format. The Tuvstarr is a full high-end speaker that play as a large floor speaker.
Technical specifications
3-way design
All elements work in closed volumes.
Frequency range 22 to 40,000 Hz
Crossover Frequency 60-100, 2250 Hz
Crossover’s Attenuation Slope: Midrange/Tweeter 6dB
Base 1 x 8.3 / 4 ”aluminum cone
Midrange 2 x 6.5 ”Ceramic cones
Tweeter 1st 16cm aluminum ribbon diaphragm
Sensitivity mid / tweeter 88dB. Bass, active system separate amplifier 2 x 600 watts fully adjustable crossover and parametric EQ
2019
The Cyclone!
A custom made model
It probably will not be much more brutal than this ...
Beryllium treble
2 x 6.5 "midrange
2 x 9.5 "high base
2 x 18 "low bass
High and low bass actively driven (2 x500 watts)